PROJECT DESCRIPTION

Used during the bottling phase for the in-line and continuous dosing of additives, in a uniform manner, they are built with technologically advanced electronic components and guarantee maximum functionality. The additives are added with precision, with uniform and guaranteed results for each bottle. Single or double dosing up to 200 strokes per minute.

DISPE-1 (GUM ARABIC AND SULPHUR WITH 1 PUMP)

Possibility to dose 1 product at a time.

- No. 1 High precision electromagnetic dosing pump, membrane controlled by microprocessor, with the following characteristics:
Flow rate from 0 to 1.52 cc. per stroke with constant pressure of 2 bar
Flow rate from 0 to 1.20 cc. per stroke with constant pressure of 4 bar
Pumping frequency from 1 to 180 strokes per minute
Liquid density not exceeding 1.2 g/cm3
- Pump tested by TUV-GS and approved according to DIN-VDE 0700 with screening class B according to DIN-VDE 8071.
- Very versatile device in terms of adjustments and flow rates.
- Sterilizable with hot water or non-vaporizable chemicals.
- Injection frequency can be set directly from the flowmeter display, for example 1 pulse per liter of wine. Constant and continuous display of the hourly feed flow rate of the filler.
- Full bore electromagnetic flowmeter ( DN25 pipe diam .) with PTFE coating and flow rateMAX 50 Hl/h.
- Injection valve made of plastic material.
- Maximum guarantee of functionality.
- All mounted on a stainless steel frame without cover with 4 ground support feet.
- Power supply 220 Volt Single Phase-50Hz.
- Dimensions 950x500x h 1000 mm. (fittings excluded)

DISPE-2 (GUM ARABIC AND SULPHUR WITH 1 PUMP)

Possibility to dose 1 product at a time.

- No. 1 High precision electromagnetic dosing pump, membrane controlled by microprocessor,with the following characteristics:
Flow rate from 0 to 1.9 cc. per stroke with constant pressure of 1 bar
Flow rate from 0 to 1.7 cc. per stroke with constant pressure of 2 bar
Flow rate from 0 to 1.6 cc. per stroke with constant pressure of 3 bar
Flow rate from 0 to 1.5 cc. per stroke with constant 4 bar pressure
Flow rate from 0 to 1.0 cc. per stroke with constant pressure of 7 bar
Pumping frequency from 1 to 180 strokes per minute
Liquid density not exceeding 1.2 g/cm3
- Pump tested by TUV-GS and approved according to DIN-VDE 0700 with screening classB according to DIN-VDE 8071.
- Very versatile device in terms of adjustments and flow rates.
- Completely sterile, non-vaporizable.
- Non-adjustable injection frequency, to be requested when ordering, for example 1 pulse for every literof wine.
- Full bore electromagnetic flowmeter with ceramic coating and MAX flow rate 100 Hl/h.
- Injection valve made of plastic material.
- Maximum guarantee of functionality.
- All mounted on a stainless steel frame without cover with 4 ground support feet.
- Power supply 220 Volt Single Phase-50Hz.
- Dimensions 950x500x h 1000 mm. (fittings excluded)

DISPE- 3 (GUM ARABIC AND SULPHUR WITH 1 PUMP)

Possibility to dose 1 product at a time.

- No. 1 High precision electromagnetic dosing pump, membrane controlled by microprocessor, with the following characteristics:
Flow rate from 0 to 4 cc. per stroke with constant pressure of 10 bar
Max pumping frequency 200 strokes per minute
Liquid density not exceeding 1.2 g/cm3
- Pump tested by TUV-GS and approved according to DIN-VDE 0700 with screening class B according to DIN-VDE 8071.
- Very versatile device in terms of adjustments and flow rates.
- Completely sterile, non-vaporizable.
- Injection frequency can be set directly from the flowmeter display, for example 1 pulse for every liter of wine.
- Full bore electromagnetic flowmeter with ceramic coating and MAX flow rate 60 Hl/h.
- Injection valve made of plastic material.
- Maximum guarantee of functionality.
- All mounted on a stainless steel frame without cover with 4 ground support feet.
- Power supply 220 Volt Single Phase-50Hz.
- Dimensions 950x500x h 1000 mm. (fittings excluded)

DISPE-4 (SULPHURIC WITH 1 PUMP)

Possibility to dose 1 product at a time.

- No. 1 High precision electromagnetic dosing pump, membrane controlled by microprocessor, with the following characteristics:
Flow rate from 0 to 1.9 cc. per stroke with constant pressure of 1 bar
Flow rate from 0 to 1.7 cc. per stroke with constant pressure of 2 bar
Flow rate from 0 to 1.6 cc. per stroke with constant pressure of 3 bar
Flow rate from 0 to 1.5 cc. per stroke with constant 4 bar pressure
Flow rate from 0 to 1.0 cc. per stroke with constant pressure of 7 bar
Pumping frequency from 1 to 180 strokes per minute
Liquid density not exceeding 1.2 g/cm3
- Pump tested by TUV-GS and approved according to DIN-VDE 0700 with shielding classB according to DIN-VDE 8071.
- Very versatile device in terms of adjustments and flow rates.
- Completely sterile, non-vaporizable.
- Injection frequency can be set in relation to the flow rate in litres of the product to be treated.
- Total bore electromagnetic flowmeter with ceramic coating and MAX flow rate 60 Q.li/h.
- Injection valve made of plastic material.
- Maximum guarantee of functionality.
- All mounted on a stainless steel frame without cover with 4 ground support feet.
- Power supply 220 Volt Single Phase-50Hz.
- Dimensions 1000x600x h 1400 mm. (fittings excluded)

DISPE-5 (GUM ARABIC WITH 1 PUMP)

Possibility to dose 1 product at a time.

- No. 1 High precision electromagnetic dosing pump, membrane controlled by microprocessor,with the following characteristics:
Flow rate from 0 to 4 cc. per stroke with constant pressure of 10 bar
Max pumping frequency 200 strokes per minute
Liquid density not exceeding 1.2 g/cm3
- Pump tested by TUV-GS and approved according to DIN-VDE 0700 with screening class B according to DIN-VDE 8071.
- Very versatile device in terms of adjustments and flow rates.
- Completely sterile, non-vaporizable.
- Injection frequency settable in relation to the flow rate in liters. Front display for reading the flow rate in liters/hour and adjusting the speed at which the pump doses the gum arabic, for example one pulse per liter of wine. This high frequency allows for a more uniform gum arabic, and therefore greater uniformity between one bottle and another.
- Full bore electromagnetic flowmeter (DN25 tube diam.) with PTFE coating andMAX flow rate 120 Hl/h.
- Injection valve made of plastic material.
- Maximum guarantee of functionality.
- All mounted on a stainless steel frame with 4 ground support feet.
- Constant pressure maintenance valve for bottling still, semi-sparkling and sparkling wine.
- Power supply 220 Volt Single Phase-50Hz.
- Dimensions 1400x900x h 1400 mm. (fittings excluded)

DISPE-6 (GUM ARABIC AND SULPHUR WITH 2 PUMPS)

Possibility of dosing 2 products simultaneously or individually.

- No. 2 High precision electromagnetic dosing pumps, membrane controlled by microprocessor, with the following characteristics:
Flow rate from 0 to 1.9 cc. per stroke with constant pressure of 1 bar
Flow rate from 0 to 1.7 cc. per stroke with constant pressure of 2 bar
Flow rate from 0 to 1.6 cc. per stroke with constant pressure of 3 bar
Flow rate from 0 to 1.5 cc. per stroke with constant 4 bar pressure
Flow rate from 0 to 1.0 cc. per stroke with constant pressure of 7 bar
Pumping frequency from 1 to 180 strokes per minute
Liquid density not exceeding 1.2 g/cm3
- Pumps tested by TUV-GS and approved according to DIN-VDE 0700 with classshielding B according to DIN-VDE 8071.
- Very versatile device in terms of adjustments and flow rates.
- Completely sterile, non-vaporizable.
- Injection frequency can be set in relation to the flow rate in litres of the product to be treated.
- Total bore electromagnetic flowmeter with ceramic coating and MAX flow rate 60 Q.li/h.
- Injection valve made of plastic material.
- Maximum guarantee of functionality.
- All mounted on a stainless steel frame without cover with 4 ground support feet.
- Power supply 220 Volt Single Phase-50Hz.
- Dimensions 1500x900x h 1500 mm. (fittings excluded)

DISPE-7 (GUM ARABIC AND SULPHUR WITH 2 PUMPS)

Possibility of dosing 2 products simultaneously or individually.

- No. 1 High precision electromagnetic dosing pump, membrane controlled by microprocessor, with the following characteristics:
Flow rate from 0 to 1.9 cc. per stroke with constant pressure of 1 bar
Flow rate from 0 to 1.7 cc. per stroke with constant pressure of 2 bar
Flow rate from 0 to 1.6 cc. per stroke with constant pressure of 3 bar
Flow rate from 0 to 1.5 cc. per stroke with constant 4 bar pressure
Flow rate from 0 to 1.0 cc. per stroke with constant pressure of 7 bar
Pumping frequency from 1 to 180 strokes per minute
Liquid density not exceeding 1.2 g/cm3
- No. 1 High precision electromagnetic dosing pump, membrane controlled by microprocessor, with the following characteristics:
Flow rate from 0 to 4 cc. per stroke with constant pressure of 10 bar
Max pumping frequency 200 strokes per minute
Liquid density not exceeding 1.2 g/cm3
- Pumps tested by TUV-GS and approved according to DIN-VDE 0700 with classshielding B according to DIN-VDE 8071.
- Very versatile device in terms of adjustments and flow rates.
- Completely sterile, non-vaporizable.
- Injection frequency can be set in relation to the flow rate in litres of the product to be treated.
- Total bore electromagnetic flowmeter with ceramic coating and MAX flow rate 60 Q.li/h.
- Injection valve made of plastic material.
- Maximum guarantee of functionality.
- All mounted on a stainless steel frame without cover with 4 ground support feet.
- Power supply 220 Volt Single Phase-50Hz.
- Dimensions 1400x900x h 1500 mm. (fittings excluded)