PROJECT DESCRIPTION

  • Self-priming stainless steel pumps with flexible impeller at low speed, suitable for the transfer of delicate and fragile, viscous fluids, even with suspended matter. The pumps are widely used in the sectors OENOLOGICAL (wine, must and destemmed grapes), FOOD (beer, fruit juice and pulp, honey, liquid sugar, syrups, glucose, milk, butter, yogurt, liquid eggs, oil, tomato sauce, brine, etc.), CHEMICAL (starch, water-based glues, emulsions, glycerin, wax, detergents, rubber latex, photographic liquids, polyelectrolyte, paints, inks, industrial waste, etc.), COSMETIC And PHARMACEUTICAL (liquid soaps, detergents, shampoos, creams, etc.).

     

    Working principle:

    The flexible impeller blades deform and suck the liquid into the pump, continuously transferring it to the outlet (discharge) port. This principle combines gentle pumping with high self-priming capacity.

     

     

    General characteristics:

    • Self-priming(automatic suction of the product up to 6 m deep even when dry).
    • Reversible(it works in both directions of rotation, allowing any excess liquid to flow back without manual intervention and facilitating the emptying of the pipes at the end of the transfer).
    • Great performanceeven at low rpm which allow the transfer of delicate and fragile fluids, viscous up to 50,000 cp even with suspended bodies and without aerating, emulsifying and damaging the solid parts.
    • Pulsation-free product transfer(continuous flow excellent for dosing, filling and filtration).
    • The pump works when mounted in any position.
    • Connections(DIN 11851, Garolla, BSP, Macon, Triclover, SMS, BSM/RJT).
    • Body in AISI 304 stainless steel.
    • Reversible mechanical seal(Steel-Graphite-NBR, Tungsten Carbide-NBR, Tungsten Carbide-Viton, etc.).
    • Flow rate: 1,000 to 43,800 litres/hour
    • Maximum viscosity: 50,000 cp
    • Fluid temperature: up to 100 °C
    • Maximum differential pressure: 4 bar
    • The simple and essential mechanism resulting from a perfect construction principle, the plurality of materials used and the high quality control of the entire production cycle, allow the creation of extremely versatile pumps, suitable for satisfying any required application.
    • Available with or without bypass.

    Impeller features:

    • Natural Rubber (NR)– Excellent for water-based liquids at room temperature such as wine and honey, maximum mechanical resistance.
    • Neoprene (CR)– Good compromise between mechanical and chemical resistance.
    • Nitrile (NBR)– Excellent resistance to oils and greases.
    • EPDM– Excellent for hot fluids, compatible with CIP process. Excellent for alkaline and acidic fluids, suitable for beer.
    • Silicone (VMQ)– Excellent for high temperatures, low mechanical resistance.

 

 

G20-A

Flow rate: 1,000 Lt./h fixed (with oil consider -20% approximately)
RPM: 900
Installed power: 0.37 kW (380V-50 Hz or 230V-50 Hz)
Connections: Gas 3/4” with 20 mm diam. rubber outlet.
Dimensions and weight: 300x210x h 140 mm. - 10 Kg.

Optionals:
STAINLESS STEEL TROLLEY ON WHEELS

G20-B

Flow rate: 1,600 Lt./h fixed (with oil consider -20% approximately)
RPM: 1400
Installed power: 0, 56 kW (380V-50 Hz or 230V-50 Hz)
Connections: Gas 3/4” with 20 mm diam. rubber outlet.
Dimensions and weight: 300x210x h 140 mm. - 10 Kg.

Optionals:
STAINLESS STEEL TROLLEY ON WHEELS

G30-A

Flow rate: 3,800 Lt./h fixed (with oil consider -20% approximately)
RPM: 900
Installed power: 0.56 kW (380V-50 Hz or 230V-50 Hz)
Connections: Gas 1”1/4 with 30 mm diam. rubber outlet.
Dimensions and weight: 340x230x h 160 mm. - 15 Kg.

Optionals:
STAINLESS STEEL TROLLEY ON WHEELS
GAS REDUCTION 1" 1/4 - GAROLLA 40 (PAIR)

G30-B

Flow rate: 5,700 Lt./h fixed (with oil consider -20% approximately)
RPM: 1400
Installed power: 0.75 kW (380V-50 Hz or 230V-50 Hz)
Connections: Gas 1”1/4 with 30 mm diam. rubber outlet.
Dimensions and weight: 340x230x h 160 mm. - 15 Kg.

Optionals:
STAINLESS STEEL TROLLEY ON WHEELS
GAS REDUCTION 1" 1/4 - GAROLLA 40 (PAIR)

G40-A

Flow rate: 6,900 Lt./h fixed (with oil consider -20% approximately)
RPM: 900
Installed power: 1.5 kW (380V-50 Hz or 230V-50 Hz)
Fittings: Garolla 40 (or others on request)
Dimensions and weight: 430x240x h 180 mm. - 20 Kg.

Optionals:
STAINLESS STEEL TROLLEY ON WHEELS
NON-STANDARD CONNECTORS (DIFFERENCE)

G40-B

Flow rate: 10,000 Lt./h fixed (with oil consider -20% approximately)
RPM: 1400
Installed power: 1.5 kW (380V-50 Hz or 230V-50 Hz)
Fittings: Garolla 40 (or others on request)
Dimensions and weight: 430x240x h 180 mm. - 20 Kg.

Optionals:
STAINLESS STEEL TROLLEY ON WHEELS
NON-STANDARD CONNECTORS (DIFFERENCE)

G60-A

Flow rate: 18,000 Lt./h fixed (with oil consider -20% approximately)
RPM: 700
Installed power: 1.5 kW (380V-50 Hz or 230V-50 Hz)
Fittings: Garolla 60 (or others on request)
Dimensions and weight: 500x265x h 200 mm. - 30 kg.

Optionals:
STAINLESS STEEL TROLLEY ON WHEELS
NON-STANDARD CONNECTORS (DIFFERENCE)

G60-B

Flow rate: 22,500 Lt./h fixed (with oil consider -20% approximately)
RPM: 900
Installed power: 1.9 kW (380V-50 Hz or 230V-50 Hz)
Fittings: Garolla 60 (or others on request)
Dimensions and weight: 500x265x h 200 mm. - 30 kg.

Optionals:
STAINLESS STEEL TROLLEY ON WHEELS
NON-STANDARD CONNECTORS (DIFFERENCE)

G80-A

Flow rate: 36,000 Lt./h fixed (with oil consider -20% approximately)
RPM: 470
Installed power: 3.3 kW (380V-50 Hz or 230V-50 Hz)
Fittings: Garolla 60 (or others on request)
Dimensions and weight: 500x265x h 200 mm. - 30 kg.

Optionals:
STAINLESS STEEL TROLLEY ON WHEELS
NON-STANDARD CONNECTORS (DIFFERENCE)

G80-B

Flow rate: 43,800 Lt./h fixed (with oil consider -20% approximately)
RPM: 600
Installed power: 3.5 kW (380V-50 Hz or 230V-50 Hz)
Fittings: Garolla 60 (or others on request)
Dimensions and weight: 630x320x h 260 mm. - 67 Kg.

Optionals:
STAINLESS STEEL TROLLEY ON WHEELS
NON-STANDARD CONNECTORS (DIFFERENCE)